|
|
Silverpoint
Drawing Complete
Overview
and History of Silverpoint Drawing
Silverpoint (more broadly, "metal point") drawing is
an archaic medium which reached its peak in the Renaissance period.

Very early in the history of writing, scribes would use metal stylii
to make marks in and on a variety of permanent and temporary media, including
wax and clay tablets. Wealthy and royal persons who needed to keep records
(business inventories and so forth) employed these scribes, and the stylus
material served as notice to all of the status of the employer - gold
and silver for the upper classes, lead for somewhat lesser beings. (An
interesting essay on writing technology development.)
As writing developed further, animal skins were used (vellum and parchment).
These skins (called the "support," stretched and scraped thin and then
dried), had to be prepared to accept the marks made with the stylus. So
a "ground" was applied to and worked into the surface; the ground consisted
of a pigment, usually white, in a binding vehicle. The binding vehicle
could be any number of preparations, including spittle and urine. Early
on, the pigments included pumice (probably from Mount Vesuvius), chalk,
bone ash, ground roasted bone (from chickens), and so forth. The use of
prepared animal skins as supports for important documents written in silverpoint
would continue for centuries. In archives and collections throughout Europe
one can find historical documents written in silverpoint on animal skins
by ancient scribes. I stumbled across one in a cathedral in northeastern
England, displayed in a case with various artifacts documenting and illuminating
the cathedral's history. In spite of the relative lack of care, this example
on vellum was in excellent condition and quite readable.
Sometime during the late medieval period (11th through 14th C.), paper
technology gradually spread through Europe from the Far East. Paper
at this time was literally worth its weight in gold! Scribes continued
to use the metal stylus to make their marks on papers prepared in the
same way as animal skins.
Soon
artists got into the act. The Dictionary of Art (1996: MacMillan,
Ltd., v. 21, pp. 339-340) states, "although a metal stylus had been
used to inscribe surfaces since Classical times, metalpoint was employed
for drawing only from the medieval period. It was in frequent use from
the late 14th Century up to the early 17th and was particularly favoured
in the Renaissance period in Italy, the Netherlands, and in Germany..."(1)
Cennino Cennini, writing in the 14th century, describes, in his Il
Libro dell'Arte (2),
the preparation of the surface to make it ready for silverpoint (he specifies
dried chicken bones, burned until very white, mixed with color, then moistened
with spittle). Leonardo da Vinci's preparation of the paper probably included
the spittle and bone ash, or perhaps the pumice mentioned earlier.
One
of Leonardo's drawings has received much attention as an example of
silverpoint drawing of the period. What many people do not know is that
this excellent, meticulous drawing of a soldier
in a helmet was executed as a student's demonstration of his ability
as a draughtsman, since all apprentices were expected to do just that
before moving on. There was no intent beyond that demonstration, and it
is unlikely that the surface was prepared in any way to ensure its permanence;
still, it exists, and is presently resting comfortably in England. (For
more information on the history of silverpoints, see Drawing
in Early Renaissance Italy by Francis Ames-Lewis.)
Many other "Old Masters" made effective use of the medium.
Raphael used silverpoint in his studies, as did Dürer, Holbein, Rembrandt
and Rubens. In fact, Durer had a "sketchbook" of prepared papers
which he carried with him during his travels, and made sketches therein.
A quick sketch I made appears on the left. Please note: it doesn't smudge.
Metalpoint was not the only drawing and writing medium employed by
artists and scribes during medieval and Renaissance times; chalks and
ink were also employed. But metalpoint was superior in some very specific
ways - it was fine enough to capture exquisite detail and would not smudge
(unlike chalk) and was completely permanent, inert and fade-proof (unlike
ink). It could be used on any prepared surface/support; thus, it made
an excellent underdrawing for paintings and frescoes. Unlike charcoal
or ink, it would not stain or otherwise impart any of itself to painting
that followed, an important characteristic for egg tempera use, the dominant
method employed during the medieval and early Renaissance periods. It
was self-contained, portable, and easy to use. And it could double as
ornament (some artists had very ornate precious metal stylii made which
they would hang around their neck). The "inert" quality is important -
some excellent examples of drawing from this period are silverpoint, and
survived through seven hundred years quite well due to their inertness.
The "grounds" gradually underwent change; artists continued to
seek better, smoother, more durable surfaces. Over a period of three or
four hundred years a series of formulas emerged which resulted in extremely
smooth, hard surfaces that not only allowed the marks to be made but amplified
them; this is the area where I am concentrating my research. The best
examples of what I consider to be the ultimate surface come from the Netherlands,
and were made with lead-based white pigment (flake white). Now I must
caution you that some descriptions of the process state that there is
a "chemical reaction" between the ground and the silver left
upon it. I'm almost certain that this is not true, that it may just be
a function of a physical state, that the extremely tiny particles of the
silver left behind on the microabrasive surface just tarnish much more
rapidly than coarser particles on a sandpaper-like surface.
Sadly, the metal points were gradually losing favor; preparation
of the surface/support was very time consuming, and each generation of
artists is always looking for faster methods. Painting was shifting away
from tempera and toward oil, and becoming more expressive and direct,
but less precise. And some enterprising soul discovered graphite and invented
the pencil! (Actually, this took a fairly long time; graphite was discovered
in England around 1560 CE, but commercial development of the graphite-and-clay
rod sheathed in wood took until the 1800s or so.)
A little aside here: we call the material inside our pencils "lead"
- in fact, it is NOT lead, but a compound of graphite and clay. The term
"lead" is a holdover from the days when a lead point was actually used
to make marks on paper. Lead, being softer than silver and gold, allowed
much greater leeway in surface preparation, and could actually leave faint
marks on UNprepared papers! The first recorded use of lead as a marking
device is mentioned in the writings of the Greek poet Thessalonika.
There was a revival of silverpoint drawing in the 18th C., and
again in the late 19th (Leighton, Strang - England), then again in the
early 20th (Picasso, Joseph Stella, Francis Wilmer Dewing), and now. Currently,
there are a few hundred artists working in the medium; most rely on descriptions
in "standard" artists' materials books, or individual explorations. Unfortunately,
most descriptions are not completely correct, in that they consistently
describe the medium as being "faint," "delicate" and so forth.

It often is, but it doesn't HAVE to be! The problem is that most
descriptions are based on examples using Gum Arabic as the vehicle/binder
and zinc oxide as the pigment, and the fact that an awful lot of people
are prepared to accept the results of using house paint, acrylic gesso,
and other less-than-perfect but quick-and-dirty ground materials. (But
to give them credit, even with a mediocre ground, it's pretty astounding
that silver will leave a mark on paper!)
Nothing wrong with the zinc oxide - it became commercially available
quite recently (late 18th C.), and is an excellent substitute for lead
white (it's not nearly so poisonous!). But Gum Arabic is problematic;
it's almost impossible to build up a thick, smooth surface with it, as
in thicker applications it tends to crack as it dries (see an unfortunate
example of this on the right). So there's little pigment on the surface
of grounds which depend on it. And that's why those drawings are faint.
(Whoever wrote those books didn't look at the drawings from the Old Masters,
as I did when I conducted my initial research in Her
Majesty's Collection at Windsor Castle and in the Prints
and Drawings Department of the British Musem, London). The beauty
of the gum arabic / zinc oxide formula is that it's readily available
- Zinc White gouache and/or Chinese White watercolor is nothing more than
very fine zinc oxide powder in Gum Arabic!
For
example, let's take a look at the extremely brief discussion in Ralph
Mayer's famous book, The Artists Handbook of Materials and techniques
:
"Silverpoint drawings...are characterized by a certain
delicacy of line... [The] paper can be made by coating
pure, smooth watercolor or drawing paper with a
thin layer of Chinese white..." (3)
Mayer's
Handbook is quite valuable for many processes, but in this one
instance the subject is not as thoroughly researched or explained. Ray
Smith's The Artist's Handbook is another well-regarded and fairly
complete reference which should be in every artist's studio, and in the
case of silverpoint it does a somewhat better job than Mayer's:
"Making your own surface by coating paper with white
gouache is...satisfactory... Other coatings may be
used, including bone dust, gypsum, and chalk, usually
mixed with glue size..." (4)
In spite of this introductory passage, the procedures Smith describes
and illustrates specifies Zinc White gouache or Chinese White watercolor.
Perhaps it is only intended to allow a beginner to witness and participate
in the process. I propose to show you the promise.
After viewing some of the magnificent drawings held by the British
museum, I knew that the kind of response one gets when using Gum
Arabic as the binder falls far short of what is truly possible. So I made
it my mission to develop a ground formula which allows a greater buildup
of the silver and a more "contemporary" response - Bold! Direct! Expressive!
- similar to what can be achieved in pencil, conte crayon, etc. I have
gone back to the descriptions in the ancients' writings, and have developed
a formula with tremendous response. The result of this research and development
is the Old Master Formula Silverpoint Ground
On
the left is a grouping of various metal points and holders:
A "pin vise" holder, which accepts several sizes of wire, available
from Cornellisen & Sons Ltd. in London.
Another "traditional" wire point using a plastic handle, commercially
available for $20 or so (overpriced, IMHO - but at the time it was the
only one I could find).
A beautifully-made stylus from a U.S. art materials supplier, with a thicker
sterling silver point. (About $26)
My "traditional" wire point with a wooden handle. (No longer
offered)
My pure silver rod point, dead soft, in a draughtsmans lead holder.
I sincerely hope this "brief" history answers some of your questions about
silverpoint!
James M. Glenn, MFA, MLS
March 2002
Last update: November 2007
|